Specifications                              Competitive Comparison                                 Features



 
   


U15 Pin-On Bucket
  • Trenching buckets 9 in. to 18 in.
  • T1 steel cutting edge 1 in. thick
  • High strength low alloy steel side cutters
  • 1/2 in. carbon steel pry plate
  • Wear plates and gussets reinforce the sides
  • Hardened bushings standard
  • Hensley top pin teeth
Hydraulic Breaker
  • Performance matched to the U15
  • Protected front end eliminates wear on the most costly parts of the hammer
  • Optimized side plate design absorbs loads. No tie rods
  • Pressure adjusting valve ensures that all blows are at full power
  • High pressure accumulator protects excavator hydraulics from pressure peaks. Low hose vibration
  • Matched piston and tool diameter for maximum energy transfer and greater power

 

 
Model KXB400F
Working weight 231 lbs.
Tool diameter 1.77 in.
CIMA tool energy rating
(ft. lbs. per blow)		 101
CIMA measured impact frequency  (blows/min.) 45
CIMA measured oil flow 13.2 gpm
CIMA measured hydraulic pressure 1740 psi
Impact frequency range
(blows/min.)		 750 ~ 2200
Oil flow range 5 ~ 13 gpm
Operating pressure range 1380 ~ 1740 psi
Overall length with tool 42.3 in.

U15 Quick Attach Coupler
  • Fast and easy way to change tools for various jobs
  • Quick coupler features Power Hole and Curl Hole positions
  • Curl Hole for best truck loading performance

 

  
  • Power Hole for highest breakout force
  • No additional tip radius extension
  • Maintains the breakout force of pin on buckets

 

Q15 Quick Attach Buckets
  • Trenching buckets 9 in. to 18 in.
  • Specifically designed for tough clay with rock scattered throughout
  • T-1 steel used in all critical or high wear components
  • Cutting edge backed by a heavy reinforcing plate with straps protecting the rest of the bottom
  • 1/2 in. carbon steel pry plate
  • Wear plates and gussets reinforce the sides
  • Hardened bushings standard
  • Hensley top pin teeth
   

BACK