U25 Pin-On Bucket
- Trenching buckets 12 in. to 30 in.
- T1 steel cutting edge 1 in. thick
- High strength low alloy steel side cutters
- 1/2 in. carbon steel pry plate
- Wear plates and gussets reinforce the sides
- Hardened bushings standard
- Hensley top pin teeth
- Power Hole and Curl Hole positions
- Curl Hole for best truck loading performance
- Power Hole for highest breakout force
- 36 in. cemetary bucket
- 48 in. drainage bucket
- Performance matched to the U45
- Protected front end eliminates wear on the most costly parts of the hammer
- Optimized side plate design absorbs loads. No tie rods
- Pressure adjusting valve ensures that all blows are at full power
- High pressure accumulator protects excavator hydraulics from pressure peaks. Low hose vibration
- Matched piston and tool diameter for maximum energy transfer and greater power
| Model | KXB600 |
| Working weight | 803 lbs. |
| Tool diameter | 2.75 in. |
| CIMA tool energy
rating (ft. lbs. per blow) |
459 |
| CIMA measured impact frequency (blows/min.) | 45 |
| CIMA measured oil flow | 39.1 gpm |
| CIMA measured hydraulic pressure | 2132 psi |
| Impact frequency
range (blows/min.) |
800 ~ 1800 |
| Oil flow range | 13 ~ 40 gpm |
| Operating pressure range | 1450 ~ 1900 psi |
| Overall length with tool | 64 in. |
